V6 PT100 Upgrade Kit für Ultimaker Elektronikboards

V6 PT100 Upgrade Kit für Ultimaker Elektronikboards
Bild vergrößern

39,95 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Lieferzeit(*): 2-3 Werktage

Art.Nr.: E3DPT100Up

V6 PT100 Upgrade Kit für Ultimaker Elektronikboards

This is a kit containing both a PT100 sensor, a heater block that is compatible with that sensor, and the required screws for holding everything together. This kit is compatible with all E3D HotEnds except for Cyclops. 

PT100's are  high temperature, high accuracy temperature sensors that you can now on your E3D-v6 HotEnd instead of a thermistor or thermocouple. PT100's are able to measure higher temperatures than thermistors - upto 400C, and are more accurate then both thermistors and thermocouples in general. Our PT100 sensors are also very easy to handle, being of a metal cartridge type construction that is secured with a set screw, no more fiberglass sleeving or clamping washer.

Please be aware that a PT100 is not the same as a thermistor and unless your electronics explicitly supports RTD Sensing devices you will need an amplifier board. 

The Ultimaker 2 uses PT100 sensors by default, and this sensor kit will allow you to connect your E3D Hotend and Ultimaker electronics with no alteration to the electronics or firmware of the Ultimaker 2. A PT100 sensor does require special electronic amplifiers, and will not work on machines other than the Ultimaker 2 without some additional electronics hardware and firmware hacking. We're working on this and hope to have a complete solution soon.

 

V6 PT100 Upgrade Kit für Ultimaker Elektronikboards

Kunden, die diesen Artikel kauften, haben auch folgende Artikel bestellt:

v6 HotEnd Full Kit 12 Volt - 1.75mm Universal (BOWDEN add-on)

v6 HotEnd Full Kit 12 Volt - 1.75mm Universal (BOWDEN add-on)

74,95 EUR (inkl. 19 % MwSt. zzgl. Versandkosten)
PTFE Bowden Tubing 3x4mm für 3.0mm Filament (100mm)

PTFE Bowden Tubing 3x4mm für 3.0mm Filament (100mm)

0,99 EUR (inkl. 19 % MwSt. zzgl. Versandkosten)
v6 HotEnd Full Kit 24V-Version - 3.00mm Bowden

v6 HotEnd Full Kit 24V-Version - 3.00mm Bowden

79,95 EUR (inkl. 19 % MwSt. zzgl. Versandkosten)
E3D V6 Nozzle Fun Pack inkl. Werkzeug und Sorter für 3mm Filament

E3D V6 Nozzle Fun Pack inkl. Werkzeug und Sorter für 3mm Filament

39,99 EUR (inkl. 19 % MwSt. zzgl. Versandkosten)
Nozzle-Holder für bis zu 25 Düsen aus Acrylglas-weiß

Nozzle-Holder für bis zu 25 Düsen aus Acrylglas-weiß

8,95 EUR (inkl. 19 % MwSt. zzgl. Versandkosten)
Fronttür für den Ultimaker 2 KLAR TRANSPARENT

Fronttür für den Ultimaker 2 KLAR TRANSPARENT

49,99 EUR (inkl. 19 % MwSt. zzgl. Versandkosten)
[<<Erstes] | [<zurück] | [weiter>] | [Letztes>>] | Artikel 40 von 60 in dieser Kategorie

Warenkorb

Ihr Warenkorb ist leer.

Willkommen zurück!

E-Mail-Adresse:
Passwort:
Passwort vergessen?

Neue Artikel

Wir akzeptieren...



Kundengruppe


Kundengruppe: Gast

Hersteller Info